Aerodynamic flow field measurements for automotive systems /

Aerodynamic flow field measurements for automotive systems /

Bibliographic Details
Main Author:	Hepner, Timothy E.
Corporate Author:	Langley Research Center
Format:	Government Document Book
Language:	English
Published:	Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center ; [1999]
Series:	NASA technical memorandum ; 208965.
Subjects:	Aerodynamic characteristics. Air conditioning equipment. Automobiles. Computational fluid dynamics. Flow distribution. Reynolds stress. Flow visualization. Velocity measurement. Flow measurement.

Similar Items

Laser anemometer measurements of the flow field in a 4:1 pressure ratio centrifugal impeller /
Published: (1997)

Laser anemometer measurements of the flow field in a 4:1 pressure ratio centrifugal impeller /
by: Skoch, Gary J.
Published: (1997)

Flow-field surveys for rectangular nozzles /
by: Zaman, K. B. M. Q. (Khairul B. M. Q.)
Published: (2012)

Design and analysis tool for external-compression supersonic inlets /
by: Slater, John W.
Published: (2012)

Laser anemometer measurements of the three-dimensional rotor flow field in the NASA low-speed centrifugal compressor.
Published: (1995)

Simultaneous three-dimensional velocity and mixing measurments by use of laser Doppler velocimetry and fluorescence probes in a water tunnel /
by: Neuhart, Dan H.
Published: (1994)

Tip vortex and wake characteristics of a counterrotating open rotor /
by: Van Zante, Dale E., et al.
Published: (2012)

A novel potential viscous flow coupling technique for computing helicopter flow fields /
by: Summa, J. Michael
Published: (1990)

Measurements and modeling of flow structure in the wake of a low profile "wishbone" vortex generator /
by: Wendt, B. J.
Published: (1994)

Implementation of and measurement with the LIPA technique in a subsonic jet : final report /
by: Falco, R. E. (Robert Edward)
Published: (1994)

Experimental study of boundary layer flow control using an array of ramp-shaped vortex generators /
by: Hirt, Stefanie M.
Published: (2012)

NASA N+2 advanced low NOx combustor technology /
by: Kramer, Stephen
Published: (2020)

Unsteady velocity measurements taken behind a model helicopter rotor hub in forward flight /
by: Berry, John D.
Published: (1997)

Time evolution of modeled Reynolds stresses in planar homogeneous flows /
by: Jongen, T.
Published: (1997)

A review of reynolds stress models for turbulent shear flows /
by: Speziale, C. G. (Charles G.), 1948-
Published: (1995)

Acoustic investigation of jet mixing noise in dual stream nozzles /
by: Khavaran, Abbas, 1953-, et al.
Published: (2012)

Aerodynamic synthesis of a centrifugal impeller using CFD and measurements /
by: Larosiliere, L. M., et al.
Published: (1997)

Aerodynamic synthesis of a centrifugal impeller using CFD and measurements /
by: Larosiliere, L. M.
Published: (1997)

Validation of a CFD methodology for variable speed power turbine relevant conditions /
by: Ameri, Ali A., et al.
Published: (2013)

Advanced noise control fan aerodynamic performance /
by: Bozak, Richard F., Jr
Published: (2009)

Water flow measurements in a 180 degree turn-around duct /
by: Sandborn, Virgil A.
Published: (1989)

Comparison of tomo-PIV versus dual plane PIV on a synthetic jet flow /
by: Wernet, Mark P.
Published: (2017)

Numerical flow visualization in basic- and hyper-cluster spheres /
by: Hendricks, Robert C.
Published: (1997)

A numerical turbulence model for multiphase flows in the protoplanetary nebula /
by: Champney, Joëlle M.
Published: (1995)

A generalized wall function /
Published: (1999)

Exploratory flow visualization investigation of mast-mounted sights in presence of a rotor.
by: Ghee, Terence A.
Published: (1995)

Experimental visualization of flows in packed beds of spheres /
by: Hendricks, Robert C.
Published: (1997)

Further development of a method for computing three-dimensional subsonic viscous flows in turbofan lobe mixers /
by: Lin, Shyi-Jang
Published: (1983)

Near-wall modelling of compressible turbulent flows : a semi-annual progress report /
by: So, Ronald M. C.
Published: (1990)

Experimental study of saddle point of attachment in laminar juncture flow /
by: Coon, Michael D.
Published: (1995)

Critical assessment of Reynolds stress turbulence models using homogeneous flows /
by: Shabbir, Aamir
Published: (1992)

Improvement of the second - and third-moment modeling of turbulence /
by: Amano, Ryoichi
Published: (1986)

Correlation of flight effects on centerline velocity decay for cold-flow acoustically excited jets /
by: Von Glahn, U.
Published: (1983)

Aerodynamic performance of a compact, high work-factor centrifugal compressor at the stage and subcomponent level /
by: Braunscheidel, Edward P.
Published: (2015)

Exploring a method for improving turbulent separated-flow predictions with [k-omega] models /
by: Rumsey, C. L.
Published: (2009)

Radial and circumferential flow surveys at the inlet and exit of the Space Shuttle Main Engine High Pressure Fuel Turbine model.
Published: (1995)

USSAERO version D computer program development using ANSI standard FORTRAN 77 and DI-3000 graphics /
by: Wiese, Michael R.
Published: (1986)

Aerodynamics of a transitioning turbine stator over a range of Reynolds numbers /
by: Boyle, Robert J.
Published: (1998)

Characterization of fluid flow by digital correlation of scattered light /
by: Gilbert, John A.
Published: (1989)

Measurements of heat transfer, flow, and pressures in a simulated turbine blade internal cooling passage /
Published: (1997)

-->