Experimental verification of corrosive vapor deposition rate theory in high veloicty burner rigs /

Experimental verification of corrosive vapor deposition rate theory in high veloicty burner rigs /

Bibliographic Details
Main Author:	Gokoglu, Suleyman A. (Suleyman Akif)
Corporate Author:	Lewis Research Center
Other Authors:	Santoro, Gilbert J.
Format:	Government Document Book
Language:	English
Published:	[Cleveland, Ohio] : [National Aeronautics and Space Administration, Lewis Research Center], [1986]
Series:	NASA technical memorandum ; 87287.
Subjects:	Vapor-plating. Corrosion and anti-corrosives. Burners. Hot corrosion. Salt spray tests. Sodium. Vapor deposition. Velocity.

Similar Items

Experiments for the determination of convective diffusion heat/mass transfer to burner rig test targets comparable in size to jet stream diameter /
by: Santoro, Gilbert J.
Published: (1986)

Digital temperature and velocity control of Mach 0.3 atmospheric pressure durability testing burner rigs in long time, unattended cyclic testing /
by: Deadmore, Daniel L.
Published: (1985)

Determination of convective diffusion heat/mass transfer rates to burner rig test targets comparable in size to cross-stream jet diameter /
by: Gokoglu, Suleyman A. (Suleyman Akif)
Published: (1986)

Investigation into the role of sodium chloride deposited on oxide and metal substrates in the initiation of hot corrosion : sixth and final report /
by: Birks, N.
Published: (1984)

Corrosion and corrosion prevention in gas turbines /
by: Mom, A. J. A.
Published: (1985)

Corrosion of mullite by molten salts /
by: Jacobson, Nathan S.
Published: (1996)

Criteria for significance of simultaneous presence of both condensible vapors and aerosol particles on mass transfer (deposition) rates /
by: Gokoglu, Suleyman A. (Suleyman Akif)
Published: (1986)

A CFD-based study of the feasibility of adapting an erosion burner rig for examining the effect of CMAS deposition/corrosion on environmental barrier coatings /
by: Miller, Robert A., et al.
Published: (2015)

Role of molybdenum in the Na₂SO₄ induced corrosion of superalloys at high temperatures /
by: Misra, Ajay K.
Published: (1986)

The oxidation and corrosion of ODS alloys /
by: Lowell, Carl E.
Published: (1990)

Burner rig with an unattached duct for evaluating the erosion resistance of thermal barrier coatings /
by: Miller, Robert A.
Published: (2011)

Hot corrosion of Co-Cr, Co-Cr-A1, and Ni-Cr alloys in the temperature range of 700 - 750°C /
by: Chiang, K. T., et al.
Published: (1980)

Mach 0.3 Burner Rig Facility at the NASA Glenn Materials Research Laboratory /
Published: (2011)

Application of induction coil measurements to the study of superalloy hot corrosion and oxidation /
by: Deadmore, Daniel L.
Published: (1984)

Cyclic oxidation and hot corrosion of NiCrY-coated disk superalloys /
by: Gabb, Timothy Paul, 1958-
Published: (2016)

Hot corrosion of single-crystal NiAl-X alloys /
by: Nesbitt, J. A.
Published: (1998)

A multiple linear regression analysis of hot corrosion attack on a series of nickel base turbine alloys /
by: Barrett, Charles A.
Published: (1985)

The corrosion protection of magnesium alloy AZ31B /
Published: (1997)

Chemical vapor deposition modeling for high temperature materials : prepared for 1991 Hall meeting of the Materials Research Society, Boston, Massachusetts, December 2-6, 1991 /
by: Gökoǧlu, Süleyman A.
Published: (1997)

Stress corrosion study of PH13-8Mo stainless steel using the slow strain rate technique /
by: Torres, Pablo D.
Published: (1989)

Oxidation and hot corrosion of hot-pressed Si₃N₄ at 1000⁰C /
by: Fielder, William L.
Published: (1985)

Molten salt corrosion of SiC and Si₃N₄.
by: Jacobson, Nathan S.
Published: (1988)

The corrosion protection of AISI [trademark sign] 1010 steel by organic and inorganic zinc-rich primers /
by: Danford, M. D., et al.
Published: (1995)

LCF life of NiCr-Y coated disk alloys after shot peening, oxidation and hot corrosion /
by: Nesbitt, J. A.
Published: (2020)

LCF life of as-deposited and annealed NiCr-Y coatings for oxidation and hot corrosion protection of disk alloys /
by: Nesbitt, J. A.
Published: (2019)

The corrosion protection of 6061-T6 aluminum by a polyurethane-sealed anodized coat /
by: Danford, Merlin D.
Published: (1990)

Stress-corrosion behavior of aluminum-lithium alloys in aqueous salt environments /
by: Pizzo, Patrick P.
Published: (1983)

Engineering correlations of variable-property effects on laminar forced convection mass transfer for dilute vapor species and small particles in air /
by: Gokoglu, Suleyman A. (Suleyman Akif), et al.
Published: (1984)

Quality and control of water vapor winds /
by: Jedlovec, Gary J.
Published: (1996)

Simulation of fatigue crack initiation at corrosion pits with EDM notches /
by: Smith, Stephen W.
Published: (2003)

Simulation of fatigue crack initiation at corrosion pits with EDM notches /
by: Smith, Stephen W.
Published: (2003)

Replaceable blade turbine and stationary specimen corrosion testing facility /
by: Santoro, Gilbert J.
Published: (1985)

The growth of small corrosion fatigue cracks in alloy 7075 /
by: Piascik, Robert S.
Published: (2015)

The corrosion protection of 2219-T87 aluminum by organic and inorganic zinc-rich primers.
by: Danford, M. D.
Published: (1995)

Plasma-assisted physical vapor deposition surface treatments for tribological control.
by: Spalvins, Talivaldis
Published: (1991)

Determmination of the accommodation coefficient using vapor/gas bubble dynamics in an acoustic field /
by: Gumerov, Nail A.
Published: (2001)

Method for determination of <5 ppm oxygen in sodium samples /
by: R. S. Reid
Published: (2005)

Mechanisms of corrosion of Ni base superalloys by molten Na₂MoO₄ at elevated temperatures /
by: Misra, Ajay K.
Published: (1984)

Study of localized corrosion in aluminum alloys by the scanning reference electrode technique.
by: Danford, M. D.
Published: (1995)

NASA GRC's high pressure burner rig facility and materials test capabilities /
by: Robinson, R. Craig
Published: (1999)