Elevated temperature compressive strength properties of oxide dispersion strengthened NiAl after cryomilling and roasting in nitrogen /

Elevated temperature compressive strength properties of oxide dispersion strengthened NiAl after cryomilling and roasting in nitrogen /

Show other versions (1)

Bibliographic Details
Main Author:	Whittenberger, J. Daniel (John Daniel) (Author)
Format:	Government Document eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Research Center, July 1998.
Series:	NASA technical memorandum ; 1998-208399.
Subjects:	Intermetallics. Aluminum nitrides. Nickel aluminides. Milling (machining) Mechanical properties. Roasting. Oxide dispersion strengthening. Compressive strength.
Online Access:	https://purl.fdlp.gov/GPO/gpo83113

Similar Items

Elevated temperature compressive strength properties of oxide dispersion strengthened NiAl after cryomilling and roasting in nitrogen /
Published: (1998)

Atomistic simulations of Ti additions to NiAl /
Published: (1997)

Atomistic simulations of Ti additions to NiAl /
by: Bozzolo, G. (Guillermo)
Published: (1997)

Effects of minor alloying additions on the microstructure, toughness, and creep strength of directionally solidified NiAl-31Cr-3Mo /
Published: (2001)

1200 K compressive properties of N-containing NiAl.
by: Whittenberger, J. Daniel (John Daniel)
Published: (1995)

Elevated temperature creep properties of NiAl cryomilled with and without Y₂O₃.
by: Whittenberger, J. Daniel (John Daniel)
Published: (1995)

High temperature dispersion strengthening of NiAl /
by: Sherman, Mark, et al.
Published: (1986)

NiAl-based polyphase in situ composites in the NiAl-Ta-X (X = Cr, Mo, or V) systems /
Published: (1995)

The effect of 0.1 atomic percent Zirconium on the cyclic oxidation behavior of †-NiAl for 3000 hours at 1200⁰C.
by: Barrett, C. Ann, 1942-
Published: (1988)

Effect of processing route on strain controlled low cycle fatigue behavior of polycrystalline NiAl /
by: Rao, K. Bhanu Sankara
Published: (1995)

Alloys based on NiAl for high temperature applications /
Published: (1985)

Assessment of microalloying effects on the high temperature fatigue behavior of NiAl.
by: Noebe, R. D.
Published: (1995)

An introduction to the BFS method and its use to model binary NiAl alloys /
Published: (1998)

An introduction to the BFS method and its use to model binary NiAl alloys /
by: Bozzolo, G. (Guillermo)
Published: (1998)

Martensitic transformation and microstructures in sintered NiAl alloys.
by: Ochiai, Shouichi
Published: (1988)

Oxidation resistant Ti-Al-Fe diffusion barrier for FeCrAlY coatings on titanium aluminides /
by: Brady, Michael P.
Published: (1996)

Low-density, high-strength intermetallic matrix composites by XD synthesis.
Published: (1991)

Evaluation of the transient liquid phase (TLP) bonding process for Ti₃-Based honeycomb core sandwich structure /
by: Bird, R. Keith
Published: (1998)

Microstructural and material quality effects on rolling contact fatigue of highly elastic intermetallic NiTi ball bearings /
by: DellaCorte, Christopher
Published: (2017)

Nickel-titanium alloys : corrosion "proof" alloys for space bearing, components and mechanism applications /
by: DellaCorte, Christopher
Published: (2010)

Static indentation load capacity of the superelastic 60NiTi for rolling element bearings /
by: DellaCorte, Christopher
Published: (2012)

Composition dependence of the M, temperature in the β'NiAl compound /
by: Ochiai, Shouichi
Published: (1988)

The oxidation and corrosion of ODS alloys /
by: Lowell, Carl E.
Published: (1990)

Deformation mechanisms of NiAl cyclicly deformed near the brittle-to-ductile transition temperature : final report /
by: Antolovich, S. D. (Stephen D.)
Published: (1992)

Microstructure and phase stability of single crystal NiAl alloyed with Hf and Zr /
Published: (1996)

60NiTi intermetallic material evaluation for lightweight and corrosion resistant spherical sliding bearings for aerospace applications : report on NASA-Kamatics SAA3-1288 /
by: DellaCorte, Christopher, et al.
Published: (2015)

Effect of Hf-rich particles on the creep life of a high-strength NiAl single crystal alloy /
by: Garg, A.
Published: (1995)

Preliminary study on fatigue strengths of fretted Ti-48Al-2Cr-2Nb /
by: Miyoshi, Kazuhisa
Published: (2002)

Preliminary study on fatigue strengths of fretted Ti-48Al-2Cr-2Nb /
by: Miyoshi, Kazuhisa, et al.
Published: (2002)

Hardness and second phase percentage of Ni-Ti-Hf compounds after heat treatment at 700 °C /
by: Stanford, Malcolm Keith, 1970-
Published: (2017)

Thermal expansion of vacuum plasma sprayed coatings /
by: Raj, S. V.
Published: (2010)

Design and manufacturing considerations for shockproof and corrosion-immune superelastic nickel-titanium bearings for a space station application /
by: DellaCorte, Christopher, et al.
Published: (2012)

Surface characterization of hydrogen charged and uncharged alph-2 and gamma titanium aluminide alloys using AES and REELS /
by: Shanabarger, M. R.
Published: (1990)

Growth of Au on Ni(110) : a BFS modelling of surface alloy phases /
by: Bozzolo, G. (Guillermo)
Published: (1994)

Lead-free experiment in a space environment /
by: Blanche, J. F., et al.
Published: (2012)

The effects of compressive preloads on the compression-after-impact strength of carbon/epoxy /
by: Nettles, A. T. (Alan T.)
Published: (1994)

The effects of compressive preloads on the compression-after-impact strength of carbon/epoxy /
by: Nettles, A. T. (Alan T.), et al.
Published: (1992)

Inviscid spatial stability of a compressible mixing layer.
by: Jackson, Thomas L. (Thomas Luther), 1957-
Published: (1989)

Inviscid spatial stability of a compressible mixing layer.
by: Jackson, Thomas L. (Thomas Luther), 1957-
Published: (1989)

Growth of Au on Ni(110) : a semiempirical modeling of surface alloy phases /
by: Bozzolo, G. (Guillermo)
Published: (1995)